577 - Thread Sealant

Medium strength. Suitable for copper, mild steel, cast iron, stainless steel and galvanised pipe. Carries the German DVGW approval. tested in accordance with EN751-1. Certified to NSF P1. Conforms with: BS 6956 : 7 (gas).
AGA Approval No. 3207 to 1050kPa (152psi).

603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

495 - Low Viscosity Instant Adhesive

Thin easy flowing general-purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. Anvailable in 20g and 50g.

574 Flange Sealant

General purpose flange sealant for gaps up to 0.5mm. Typical applications are hydraulic and pneumatic control valves, transmission and engine flanges and marine pipework. Suitable for 90% of flange sealing applications. Carries the German DVGW approval. Test in accordance with EN751-1. certified to NSF P1.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.

542 Hydraulic Sealant

Medium strength, medium viscosity. Impervious to all common hydraulic fluids including fire resistant synthetics. Will not clog valves or fine filters. Replaces tapes, pastes and self-sealing compression joints.
Recommended for threaded fittings as used in hydraulic and pneumatic installations.
Medium threadlocking strength.
Suitable for high pressure systems.
Temperature range: -55C to 150C

Heavy-Duty Anti-Seize Grease

A heavy-duty, high temperature anti-seize thread compound applicable for heavy pressure applications in temperatures up to 870C (1600F).

767

603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

Loctite 9466 A+B Dual Cartridge

Loctite Hysol 9466 A&B is a toughened, 2K-Epoxy adhesive, suitable for multi purpose applications requiring long open time and high bonding strength. Ideal for a wide variety of substrates like metals, ceramic and most plastics.

Working time: 60min.
Fixture time: 180min.
Viscosity in Pa-s: 35.
Tensile strength: 32N/mm².
Peel strength: 8N/mm.
Service temperature range: -55°C - +120°C.
Colour mix: off-white.
Pack sizes: 50ml, 400ml.

577 - Thread Sealant

Medium strength. Suitable for copper, mild steel, cast iron, stainless steel and galvanised pipe. Carries the German DVGW approval. tested in accordance with EN751-1. Certified to NSF P1. Conforms with: BS 6956 : 7 (gas).
AGA Approval No. 3207 to 1050kPa (152psi).