638* - High Strength Retainer

For heavy duty applications on cylinder liners, splines, structural tubing, drive keys etc. High viscosity. Available in 3ml, 50ml and 250ml. *Replaces 635.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

770 Polyolefin Primer

Materials such as polypropylene, polyethylene, and thermoplastic rubber are normally difficult to bond. This material makes them suitable for bonding with Loctite cyanoacrylate adhesives.

Superclean Safety Solvent

7061 is a non-CFC solvent based formulation for cleaning and degreasing of surfaces to be bonded with Loctite adhesives.

Loctite 3463 Metal-filled 2-Part Epoxy

"2K Epoxy" - Sets in 10 minutes. Steel filled kneadable Stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted. Ideal for emergency sealing of leaks in pipes and tanks, smoothing over rough finish welds and repairing small cracks in castings

Working life: 3 min.
Fixture time: 10 min.
Shear strength (GBMS): >6 N/mm²
Compressive strength: 82,7 N/mm²
Service temperature range: -30 °C to +120 °C

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

Loctite 415 - General-Purpose Instant Adhesive

Loctite 415 a high viscosity cyanoacrylate, general-purpose adhesive and is particularly suited to bonding of metals, rubbers and plastics. Available in 20g, 50g and 500g.

572 - Thread Sealant - Coarse Threads - Slow Cure

Recommended for all coarse threads where slow cure is required to allow final adjustment before sealing. Meets BS 6956 Type A for sealing gas fittings. WRC approved for use with potable water.

Loctite F246 Bondmaster Kit 50ml

Loctite F246 is a 2 part -'no-mix' adhesive which cures rapidly at room temperature.

Exceptional resistance to peel, fatigue and impact loads on a wide variety of surfaces. Excellent environmental durability and chemical resistance, make it ideal for applications demanding structural integrity. Outstanding performance can allow the adhesive to be used in place of rivets and/or welding thereby providing reduced assembly times, lighter structures and an improved aesthetic appearance.

High Performance Silicone Gasket - 5900

Typical applications include stamped sheet metal covers (timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required. It withstands on line, low pressure tests carried out before product begins to cure. The thixotropic nature of LOCTITE 5900 reduces the migration of liquid product after application to the substrate. LOCTITE 5900 has an excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals. NSF International Registered to NSF Category P1 for use as a sealant where there is no possibility of food contact in and around food processing areas.