603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

Loctite Hysol 3475 A&B - Metal Set A1 - Slow Cure

Loctite Hysol 3475 A&B is an aluminium filled, 2K-Epoxy adhesive, for repairing and rebuidling worn metal parts. Ideal for repairing castings and cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 45 min.
? Fixture time: 180 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 70 N/mm
? Operating temperature: up to 120C

SuperLube Grease

Multi-purpose synthetic lubricant with PTFE. Silicone free. H1 approved. Temperature range
-43C to +230C



SuperLube Aerosol Grease: Penetrates, lubricates and cleans. Provides a long lasting barrier of protective grease.

Metal Set Syringe

A two-part filled epoxy resin supplied in a small hand held dual syringe giving accurate dispensing for small scale repairs.

Loctite 3463 Metal-filled 2-Part Epoxy

"2K Epoxy" - Sets in 10 minutes. Steel filled kneadable Stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted. Ideal for emergency sealing of leaks in pipes and tanks, smoothing over rough finish welds and repairing small cracks in castings

Working life: 3 min.
Fixture time: 10 min.
Shear strength (GBMS): >6 N/mm²
Compressive strength: 82,7 N/mm²
Service temperature range: -30 °C to +120 °C

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.